1590 buckeye drive - milpitas, ca 95035 - tel: 408-432-9898 - fax: 408-432-1551 - components@remec.com - www.remec.com specifications subject to change without notice. specifications subject to change without notice. remec double balanced mixer multi-octave band rf 5.0-15.0 ghz lo 3.0-17.0 ghz if dc-2000 mhz mm8 x ms-3 mm8 x ms-14 rf(ghz) 6.0-14.0 5.0-14.0 5.0-14.0 5.0-14.0 5.0-15.0 5.0-15.0 5.0-15.0 5.0-15.0 if(mhz) dc-500 dc-1000 dc-2000 dc-2000 dc-1500 dc-1500 dc-1500 min 16 db 23 db 15 db 25 db typical 5.2 db 6.5 db 7.0 db 8.5 db 24 db 32 db 18 db 39 db 21 db +2 dbm +5 dbm +8 dbm +11 dbm +14 dbm +18 dbm +7 dbm +10 dbm +14 dbm max 7.0 db 8.5 db 9.5 db 10.0 db mm83 mm84 mm86 mm83 mm84 mm86 mm83 mm84 mm86 conditions specifications electrical specifications (1) : parameter ssb conversion loss: (2) (3) isolation lo to rf: lo to if: rf to if: input 1-db compression point: input third order intercept point: lo power: (4) lo(ghz) 5.5-14.5 4.0-15.0 3.0-16.0 3.0-17.0 3.0-17.0 7.0-17.0 3.0-7.0 7.0-17.0 3.0-17.0 3.0-17.0 3.0-17.0 notes: 1. specifications are guaranteed when tested as a downconverter in a 50 ohm system at +25c with the nominal lo power. specifications indicated as typical are not guaranteed. 2. noise figure is typically within 0.5 db of conversion loss for if frequencies greater than 10 mhz. 3. conversion loss typically degrades less than 0.5 db at +100c and improves less than 0.5 db at -55c. 4. usable lo drives are up to 2 db below and 3 db above nominal. 5. see application note m112, for aid in selecting the outline and for mounting and installation information. mm8 x ms-3 mm8 x ms-14 typical performance at 25 c lo power 3 = +7 dbm 4 = +10 dbm 6 = +14 dbm all dimensions are in inches and [mm]. 3-32 outline: ms3c outline: ms3d
|
